Features:
- Automatic head travel (11 m/min)
- Automatic wheel downfeed can be set for per pass and total downfeed
- Grinding Chuck tiltable 0 to 90 degrees
- Grinding head tiltable +5 to –30 degrees
- Heavy duty coolant system with static magnetic filter
- Mechanical T-Groove chuck for stack grinding of knives with step blocks
- Head travel guides are covered
- Head travels on hardened and ground replaceable wear strips
Standard Machine Includes:
- Heavy Duty machine stand
- One 125mm (5”) vitrified cup wheel
- One set of blade clamps
- Set of Step Blocks for stacking up to 4 planer knives (1/8” x 40 degree back angle)
 |
Closeup of Clamping and Stack Grinding Four 24" Planer knives at once.
NOTE:
Brass Step blocks sit conveniently in the chucks T-Groove slot and have to match the thickness and bevel angle of the knives.
|
| MACHINE SPECIFICATIONS |
| Max. Knife Length |
850mm (33”) |
| Chuck to wheel clearance |
30mm (1.2”) |
| Grinding Motor |
2 HP |
| Grinding Wheel Diameter |
125mm (5 “) |
| Grinding Wheel Bore |
16mm |
| Chuck Width |
90mm (3.5”) |
| Voltage |
220V, 3Ph, 60Hz |
| Weight |
190kg (420 lbs) |
MVM BM 850 Optional Accessories
- Magnetic Chuck
- Variable Carriage Speed (4 to 11 m/min)
- 2 Speed Carriage Drive Motor
- Step Blocks for stacking up to 4 planer knives
(must specify knife thickness and back angle)
- Knife Extension Resting Blocks
(allow knives that are wider than the chuck to be referenced from the back)
220V Single Phase Power Options
- Static Phase Converter PC-1.5
(will reduce HP by 40%-single machine only)
- 3HP Rotary Phase Converter (no loss in HP)
Recommended Grinding Wheels
- 5” Borazon Wheel 11A2 120 grit
- 5” Diamond Wheel 11A2 180 grit
- 5” Vitrified Cup Wheel 46 grit
- 5” Vitrified Cup Wheel 36 grit
